Infrared fast driers from IBT do not only dry fast, in-depth and efficiently. Due to the new equipment for control and regulation they can dry at any time and / or with the temperature limitation if it will be desired.

Temperature control - a special equipment of dryers for temperature-sensitive building materials and buildings

The problem of temperature limitation arises in practice for instance, if thin layers of concrete floor have to be dried, in addition to an insulation layer or with a poured in underfloor heating.

The required maximal temperature must be put into a display on the backside of the unit. The temperature of the drying floor or wall is measured by a sensor all through the drying process.

Display to choose the maimal temperature	Unit with sensor
	The temperature limitation prevents, that a temperature limit, chosen by the user, will be exceeded on the drying surface of the floor/wall. So the temperature inside of the floor/wall and for layers below can be limited. Left: The Zebra 2 unit with temperature control , drying a floor

The special equipment with temperature control is available for the unit IWT 1,6 5x10 Zebra 2.

The week timer

With this timer it is possible to pre-program drying cycles for maximal 7 days.

The timer is integrated into the unit, so that the PRCD protection switch for the unattended operation can work independently from the pre-programmed switching cycles.

The unit is able to work unattended for some days and needn´t be switched on or off; so the user can reduce costs for travels and labour. All units except X-sel mini can be equipped with the week timer.

Combination of temperature control and week timer

This combination is available for the unit IWT 1,6 5x10 Zebra 2. With this equipment you can dry in the pre-programmed time, with the chosen limited temperature.

But it is also possible, to disable the function of the timer or / and of the temperature control.

Week timer and display for the temperature control on the back side of a "Zebra 2" unit